Guangzhou-GWS Environmental Equipment Co., Ltd. is a wholly owned high-tech enterprise under the Fifth Electronic Research Institute of the Ministry of Industry and Information Technology. It has been focusing on the research, development, production, sales and service of environmental simulation system.
GWS has been committed to providing world’s advanced product and service for users since its establishment. The sales value of GWS growing sustainably not only in home market but also increasing rapidly worldwide trade. Our products are widely applied in the industries like electronics, machinery, aerospace, shipbuilding, weapon, automobile, light, chemical and pharmaceuticals.
SPH Series Horizontal Type Oven
Horizontal type with horizontal air supply cycle.
The air duct is not easy to be blocked, and the sample can be heated evenly.
Pressure relief safety door: when the pressure rises sharply due to abnormal factors in the oven, the safety door is opened to relieve pressure to prevent the damage of the oven and other accidents.
Advisory detail
IPH(T) Series Horizontal Type Oven
Horizontal type with horizontal air supply cycle.
The air duct is not easy to be blocked, and the sample can be heated evenly.
Gas introduction interface: nitrogen, carbon dioxide and other gases can be introduced to reduce the concentration of oxygen in the test chamber and reduce the risk of oxidation of the sample surface.
Advisory detail
STPH(T) Series Horizontal Type Oven
Horizontal type with horizontal air supply cycle.
The air duct is not easy to be blocked, and the sample can be heated evenly. Specific welding structure. Temperature can be reach to 500℃. Double layer stacking can be customized to improve space utilization.
Advisory Detail
TS Series Thermal Shock Chamber
Two-zone structure Samples can be switched in different temperature area through fast up-and-down movement of the basket. The temperature recovery time is short.
TSG Series Thermal Shock Chamber
Three-zone structure by means of damper switching.
The sample does not need to be moved and is easily tested through cable connection.
Samples can be exposed at ambient temperature.
Temperature/Humidity/vibration Combined Chamber
The system can simulate temperature, humidity and vibration simultaneously to conduct a combined simulation. Combined system can reflect the adaptability of electrical and electronic products to the changes of temperature, humidity and vibration in the process of transportation and actual use, and expose the defects of the sample.
